| Customization: | Available |
|---|---|
| Certification: | CE, ISO 9001:2008 |
| Application: | Paddy Field, Lawn, Farmland |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
The utility model is mainly used for harvesting various kinds of livestock grass, such as alfalfa, ryegrass, oat grass and other grass.Disc mower has higher working efficiency and is more suitable for cutting larger crops than reciprocating mower. The knife pole is equipped with a spiral handle, which is easy to rise and fall. It is hung by a double spring, which can adapt to the concave and convex conditions of the ground and is not easy to damage the grassland. The machine is equipped with safety devices for protection. In the process of operation, when encountering obstacles or abnormal force, the mower disc can move backward to avoid damage to the machine.
|
Model |
Cutting width |
Dics Nos |
Rotary speed of discs |
Disc Cutting Dia |
Moving speed |
Matched power |
Linkaed |
Weight |
|
YS1607 |
1.67m |
4 |
2900 |
19.7in.(500mm) |
4-12 km / h |
45hp-55hp |
Cat1-2 |
436kg |
|
YS2050 |
2.05m |
5 |
40hp-55hp |
Cat1-2 |
487kg |
|||
|
YS2450 |
2.45m |
6 |
50hp-70hp |
Cat2 |
590kg |
|||
|
YS2860 |
2.86m |
7 |
55hp-70hp |
Cat2 |
629kg |
|||
|
YS3200 |
3.20m |
8 |
60hp-90hp |
Cat2 |
707kg |
| Main features |
| 1. It is mainly used for the harvesting of all kinds of herbage. |
| 2. The hay mower is attached to the rear suspension of the tractor and use the PTO to work. |
| 3. The machine has 2 - 8 pieces high-speed rotating knife plates, with two blades on each blade, and the high-speed operation reaches 1-2 hectares per hour, the productivity is very high. |
| 4. The rotation of knife plates is driven by the gear drive instead of the traditional belt transmission,which makes the job more stable, the failure rate is low and the maintenance cost is low. |
| 5. use of spring suspension and the rotation of the belt, the knife beam is low, easy to rise and fall, which can be cut with the ground, the cutting stubble is low, and the surface has good imitation ability. |
| 6. The blades can be punched back to avoid damage |
|
7. The lawn mower relies on the rotating force of the turntable to concentrate the grass in the middle position for easy collection. |
| Advantage |
| 1. Disc mower with different discs, also with various of cutting width, from 1.3m-2.55m, cutting grasses into 2-6 lines. |
| 2. Disc mower widely used in large pastures, usually cut grass, hay, alfalfa, corn stalk, etc. |
| 3. Disc mower cuts through heavy, high crops without wrapping or plugging, as well as for light thin grass. |
| 4. Disc mower can be raised quickly for turning or transport without adjusting the 3 point hitch. |
| 5.Disc mower suitable for wide range terrins and contours, even uneven and rochy ground. |
It is mainly used for harvesting all kinds of forage.
The mower is connected to the tractor rear suspension frame, and the power output shaft is used for operation. The machine has 4-8 high-speed rotating Cutterheads. Each cutterhead is equipped with two blades. It can work at high speed up to 1-2 hectares per hour with high productivity.
The rotation of 4-8 cutter heads of this machine is driven by gear instead of traditional belt drive, which makes the work stable, the failure rate low and the maintenance cost low.
Because of spring suspension and belt rotation, the knife beam is low, easy to rise and fall, it can cut close to the ground, with low cutting stubble, and has a good imitation ability to the ground.
When the cutting blade encounters a big obstacle, it can be knocked back to avoid damage to the blade. The mower relies on the rotating force of the turntable to concentrate the grass in the middle position for easy collection.
){kind=link}