| Customization: | Available |
|---|---|
| After-sales Service: | Support Remote Quality Assurance |
| Warranty: | 1 Year After Shipment Date |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Mowing and squashing machine is a one-time completion of cutting, squashing and spreading operations of forage harvesting machinery, also known as mowing and modulation machine, will be cut off the fresh forage stalks squashed and squeezed, can accelerate the evaporation of its internal moisture, shorten the drying time, and make the stalks, leaves, flowers drying consistency, reduce the loss of nutrients, and improve the quality of hay, more in the humid high-yield pasture harvesting of legume forage grasses.
It is mainly used for harvesting all kinds of forage.
The mower is connected to the tractor rear suspension frame, and the power output shaft is used for operation. The machine has 4-8 high-speed rotating Cutterheads. Each cutterhead is equipped with two blades. It can work at high speed up to 1-2 hectares per hour with high productivity.
The rotation of 4-8 cutter heads of this machine is driven by gear instead of traditional belt drive, which makes the work stable, the failure rate low and the maintenance cost low.
Because of spring suspension and belt rotation, the knife beam is low, easy to rise and fall, it can cut close to the ground, with low cutting stubble, and has a good imitation ability to the ground.
When the cutting blade encounters a big obstacle, it can be knocked back to avoid damage to the blade. The mower relies on the rotating force of the turntable to concentrate the grass in the middle position for easy collection.
| Main features |
| 1. It is mainly used for the harvesting of all kinds of herbage. |
| 2. The hay mower is attached to the rear suspension of the tractor and use the PTO to work. |
| 3. The machine has 2 - 8 pieces high-speed rotating knife plates, with two blades on each blade, and the high-speed operation reaches 1-2 hectares per hour, the productivity is very high. |
| 4. The rotation of knife plates is driven by the gear drive instead of the traditional belt transmission,which makes the job more stable, the failure rate is low and the maintenance cost is low. |
| 5. Use of spring suspension and the rotation of the belt, the knife beam is low, easy to rise and fall, which can be cut with the ground, the cutting stubble is low, and the surface has good imitation ability. |
| 6. The blades can be punched back to avoid damage |
|
7. The lawn mower relies on the rotating force of the turntable to concentrate the grass in the middle position for easy collection. |
| Advantage |
| 1. Disc mower with different discs, also with various of cutting width, from 1.3m-2.55m, cutting grasses into 2-6 lines. |
| 2. Disc mower widely used in large pastures, usually cut grass, hay, alfalfa, corn stalk, etc. |
| 3. Disc mower cuts through heavy, high crops without wrapping or plugging, as well as for light thin grass. |
| 4. Disc mower can be raised quickly for turning or transport without adjusting the 3 point hitch. |
| 5.Disc mower suitable for wide range terrins and contours, even uneven and rochy ground. |
| MODEL | MAP1670 | MAP2050 | MAP2450 |
| DIMENSIONS(L*W*H) | 3400*1300*1000mm | 3800*1300*1000mm | 4200*1300*1000mm |
| STRUCTURE WEIGHT | 436Kgs | 487Kgs | 590Kgs |
| CUTTING WIDTH | 1670mm | 2050mm | 2450mm |
| Disc Rotor QTY | 4pcs | 5pcs | 6pcs |
| PTO TURNNING SPEED | 540r/min | 540r/min | 540r/min |
| NUMBER OF BLADES | 8PCS | 10PCS | 12PCS |
| PTO RPM | 540 | 540 | 540 |
| DISC DIAMETER | 500MM | 500MM | 500MM |
| DISC SPEED | 2900RPM | 2900RPM | 2900RPM |
| POWER REQUIRED | Above 90HP | ||
1. Order Placement
Simply email us your requirements or place your order directly through our online platform. We'll make the process as smooth as our machinery operates.
2. Payment Options
After confirming our Proforma Invoice (PI), you can pay via T/T or through Made-in-China's Trade Assurance for added security.
3. Factory Direct?
Absolutely! With 17+ years of manufacturing experience, our skilled technical team can even customize designs to meet your specific needs.
4. Engine Options
Our site dumpers feature reliable EPA/EURO certified engines - because power should never be in short supply.
5. Order Process
Step 1: Discuss your needs with us (email or trade manager)
Step 2: We'll send a PI for your approval
Step 3: Production begins after receiving your deposit
Step 4: Delivery arranged after final payment (typically 7-15 days for standard orders)
Have more questions? Our team responds faster than our dumpers can load - reach out anytime!
6.Do you offer product customization?
Absolutely! Our engineering team can modify standard designs to meet your specific requirements. Common customizations include:
Different engine configurations
Special paint colors
Customized attachments
Unique dimension requirements
){kind=link}